Thermal capacity: 0.3-3ton/h
Rated thermal efficiency: 92-95%
Pressure: 0.7-1.6Mpa
Available fuel: Heavy oil, diesel, natural gas, lpg, etc.
Available industries: food beverage feed mill textile mill paper mill packaged refinery chemical pharmaceutical, etc.
Advanced structure: Equipped with water tubes structure, high operation safety level, easy operation and easy for maintenance.
High efficiency: The thermal efficiency can reach >94%,for better fuel saving.
Safety operation: Equipped with multiple safety control system of pressure, temperature and water level.
Top burner: Equipped with Italy brand Baltur, Riello and other famousbrands to achieve the excellent combustion effect.
Ignition 2~4 minutes to get full-pressure steam.
Combustion, steam pressure and water level are all controlled automatically, so the operation is both safe and economical.
Combustion gas flows at high speed between groups of water pipes. Heat convection is good and heat attraction is fast, heat transfer effect is good.
The sound of blower and combustion is 5~6db lower than that of the same type of old products, even if it is operated next to the boiler, it will not be affected.
Furnace structure with good heat absorption effect, combustion thermal efficiency up to 92%~96%.
Full-automatic CO2 welding, consistent production, uniform component specifications, quality assurance.
The whole boiler commissioning factory, on-site installation-free, the equipment arrives at the use of the site can be used after power.
Water pipe temperature can be detected to detect whether the boiler has produced scale, if the temperature is detected to rise to the set temperature, the boiler will automatically stop running.
Can detect the temperature of the steam, when the temperature exceeds the set value of the automatic power-off and shutdown to ensure the safety of boiler operation.
Furnace water concentration conductivity can be detected, when the conductivity reaches the discharge standard, the boiler will automatically discharge the furnace water, stable control of the quality of the furnace water to improve the quality of steam, to avoid caustic embrittlement of the furnace body, scale production to reduce boiler efficiency and water pipe damage.
| LSS Series Steam Boiler Parameter | ||||||
|---|---|---|---|---|---|---|
| Model | Rated capacity(t/h) | Rated pressure (Mpa) | Feed water temperature(℃) | Steam temperature(℃) | Thermal efficiency(%) | Boiler weigh(t) |
| LSS0.3 | 0.3 | 0.4 | 20 | 151 | 90 | 1.5 |
| LSS0.5 | 0.5 | 0.4 | 20 | 151 | 91 | 2 |
| LSS0.5 | 0.5 | 0.7 | 20 | 170 | 91 | 2 |
| LSS0.7 | 0.7 | 0.4 | 20 | 151 | 91.3 | 2.3 |
| LSS0.7 | 0.7 | 0.7 | 20 | 170 | 91.3 | 2.3 |
| LSS1 | 1 | 0.4 | 20 | 151 | 92 | 2.9 |
| LSS1 | 1 | 0.7 | 20 | 170 | 92 | 2.9 |
| LSS2 | 2 | 1.0 | 20 | 184 | 96 | 6.6 |
| Note: Parameter is for reference only, if any changes should follow the factory technical data. | ||||||
