Regarding thermal oil boilers, I believe everyone is familiar with them. Because this type of boiler is an important product on the website, specific and comprehensive introductions have been made to it so that everyone can increase their knowledge in this area and make progress through related articles. So next, it still revolves around it to respond to the above requirements.
1.Are there differences among different types of thermal oil boilers? Can a thermal oil boiler be used in a deodorization tower?
For thermal oil boilers, if their types are different, then they are different in specific structure, control system, operation method, stability performance and price. In a deodorization tower, a thermal oil boiler can be used. However, attention should be paid to the temperature of the thermal oil because sometimes there will be problems, so special attention is required. However, professionals suggest that using a hot water boiler is better than a thermal oil boiler.
2.What are the specific reasons for the oil spill of the thermal oil boiler?
If there is an oil spill problem in the thermal oil boiler, then the specific reasons are generally the following two:
Reason 1: In the system, the oil temperature suddenly changes, causing the composition of the oil to change, resulting in too fast oil pressure rise and fall, and capacity expansion, breaking the system balance and thus causing the oil spill problem.
Reason 2: The pressure difference of the thermal oil in the heating system circulation exceeds the pressure difference of the high-level tank, causing the oil-gas mixture to emerge from the high-level tank, thereby causing the oil spill problem.
3.What is the specific reason for the stop of the grate of the thermal oil boiler?
If the grate of the thermal oil boiler stops rotating, then the specific reason is that the grate chain is too loose, or the meshing with the sprocket is not good. It is also possible that the sprocket is severely worn and has poor contact with the chain, etc. Therefore, corresponding adjustment work should be carried out at this time to tighten the grate. If it still doesn’t work, then the sprocket can only be replaced to solve the problem.
