In hot water boilers, what are the related questions? For example, for a pressure-bearing hot water boiler, does it need a water level gauge? And, what is the role of the pressure equalizing pipe in a hot water boiler? In addition, there are some other questions, etc. So below, in the form of questions and answers, it will be specifically expanded and carried out so that everyone can have a thorough understanding and comprehensive knowledge.
1.The tonnage of the hot water boiler is 1 ton. If the temperature is to be raised from 75 degrees to 90 degrees, what is its flow rate in 1 hour?
To answer this question, what we need to know is that for a standard 1-ton hot water boiler, its flow rate is 24 cubic meters per hour. If the temperature difference between the supply and return water of this boiler is 15 degrees, then theoretically, when the boiler is operating at full load, its circulating water volume can reach 40 cubic meters per hour. However, affected by some factors, etc., its value is somewhat reduced. So, its flow rate in 1 hour is 25 cubic meters.
2.Does a pressure-bearing hot water boiler need to use a water level gauge? And, what is the specific role of the pressure equalizing pipe in a hot water boiler?
A pressure-bearing hot water boiler is in a full water state. Therefore, it does not need to use a water level gauge. As for the pressure equalizing pipe in the hot water boiler, its specific roles are:
Role 1: Before the impeller cavity turns to the loading port, the high-pressure gas is led out to avoid problems, etc.
Role 2: In liquid or gas pipelines, maintain the balanced pressure inside the container.
Role 3: In electrical systems, it is mainly used to balance the voltage.
3.If the boiler model is CLSG, then what does it represent?
If the boiler model is CLSG, then it can be known that this is a vertical hot water boiler. In terms of manufacturing level, there are five levels: A, B, C, D, and E. If there is a representation of 85/60 later, it indicates that the water outlet temperature of this boiler is 85°C and the return water temperature is 60°C.
