The drawing of autoclave is based on the national standard 150 of capacity regulation and designed by the Fourth Design Institute of the Ministry of Machinery.
1. The drawing of autoclave is based on the national standard 150 of capacity regulation and designed by the Fourth Design Institute of the Ministry of Machinery.
2. the selection of Ansteel 16MnR container plate, beveled around the edge of the planing, the use of oil a building welding preparation process, Shanghai people's automatic submerged lone welding equipment, pressurized components 99.9% of the X-ray film flaw detection, to ensure that the welding process.
3. The kettle ring and kettle door are made of 16Mn secondary forging parts, annealed and heat-treated, and the kettle door is insulated before leaving the factory.
4. Reducer adopts turbine turbo, different from other manufacturers of cycloid reducer, triple reliable protection ① electronic interlocking device ② manual interlocking device (manual screw) ③ hand crank reducer.
5. in 2x21 m kettle, can hold 20,000 standard bricks, 28.8 cubic meters of gas block; ¢ 2x31 m kettle, can hold 30,000 standard bricks, 39 cubic meters of gas block.
6. 21 m kettle: 14mm and 16mm weight difference of 2 tons; 31 m kettle: 14mm and 16mm weight difference of 3 tons; 7 valve DN80 is different from other manufacturers port DN50; bottom plate (20mm) is different from other manufacturers of 18mm; the
Ground bolt (24mm ground, over wire, including cap) is different from other manufacturers 18mm rebar.
1. The autoclave is a steel horizontal cylindrical device, the cover is pressed by the whole 16MnR steel plate, the cover flange and the kettle body flange are made of 16Mn whole forging process. The welds of pressurized parts are heat-treated according to relevant standards.
2. The autoclave door is movable and quick-opening structure, which is opened and closed by hand-operated speed reducer, and can be opened and closed electrically, pneumatically and hydraulically according to the requirements of users. Equipped with perfect and reliable interlocking protection device, it avoids hidden danger to a large extent and ensures reliable operation of autoclave and reliable production of users. There are two types of kettle door opening for users to choose: side-opening type and top-opening type. Side-opening type adopts rotating arm type opening mechanism, which is flexible in rotation and easy to open; top-opening type adopts lever type opening mechanism, the lower end of which is connected with the kettle door, and the upper end is equipped with a counterweight device, which is light and easy to open, and occupies little space on the side of the kettle.
3. The sealing of autoclave door adopts imported rubber sealing ring produced by the manufacturer, which is easy to install and has good sealing. The kettle body support is set up in three forms of fixed support, movable support and end support for different parts of the kettle body. It adapts to the thermal expansion and contraction of the autoclave body and ensures the normal work of the autoclave.
4. The autoclave is equipped with reliable valves, pressure gauges, temperature measuring elements, steam inlet and outlet valves, sealing ball valves, traps and other necessary valves and instruments, and there is a decontamination tank for users to choose and use.
5. In addition to the conventional steam distribution pipe and guide rail, we are more considerate to the users, specially set up sealing steam anti-punching cover, trapping cover.
